Exploring the potential of a Ephedra alata leaf extract: Phytochemical analysis, antioxidant activity, antibacterial properties, and green synthesis of ZnO nanoparticles for photocatalytic degradation of methylene blue.

Ephedra alata leaf extracts have therapeutic properties and contain various natural compounds known as phytochemicals. This study assessed the phytochemical content and antioxidant effects of a Ephedra alata leaf extract, as well as zinc oxide (ZnO) nanoparticle production. The extract contained phenolic acids, including vanillic acid, chlorogenic acid, gallic acid, p-coumaric acid, vanillin and rutin. Its total phenolic content and total flavonoid content were 48.7 ± 0.9 mg.g-1 and 1.7 ± 0.4 mg.g-1, respectively. The extract displayed a DPPH inhibition rate of 70.5%, total antioxidant activity of 49.5 ± 3.4 mg.g-1, and significant antimicrobial activity toward Gram-positive and negative bacteria. The synthesized ZnO nanoparticles had spherical shape, crystallite size of 25 nm, particle size between 5 and 30 nm, and bandgap energy of 3.3 eV. In specific conditions (90 min contact time, pH 7, and 25°C), these nanoparticles efficiently photodegraded 87% of methylene blue, suggesting potential applications for sustainable water treatment and pollution control.

Osteoporosis therapy using nanoparticles: a review.

Osteoporosis, characterized by low bone density and increased risk of fractures, represents a major healthcare challenge. Anti-resorptive and anabolic medications are now used to treat osteoporosis in an effort to reduce bone loss and increase bone mass. Innovative methods are required since current therapies have drawbacks. Promising options for improving bone health and medicine delivery are provided by nanotechnology. Bisphosphonates with tetracyclines and oligopeptides, among other compounds that target the bone, make it easier to provide a particular medication to bone tissue. Additionally, nanocarriers are essential for the administration of both organic and inorganic nanoparticles in the treatment of osteoporosis. Drug encapsulation and controlled release may be done in a variety of ways using organic nanoparticles. Inorganic nanoparticles have special qualities that help in medication transport and bone repair. This review explores the potential of nanoparticle-based strategies in the treatment of osteoporosis.

Drug delivery methods based on nanotechnology for the treatment of eye diseases.

One of the most difficult tasks among the numerous medication delivery methods is ocular drug delivery. Despite having effective medications for treating ocular illness, we have not yet managed to develop an appropriate drug delivery strategy with the fewest side effects. Nanotechnology has the potential to significantly address the drawbacks of current ocular delivery systems, such as their insufficient therapeutic effectiveness and unfavourable side effects from invasive surgery or systemic exposure. The objective of the current research is to highlight and update the most recent developments in nano-based technologies for the detection and treatment of ocular diseases. Even if more work has to be done, the advancements shown here might lead to brand-new, very practical ocular nanomedicines.

Exploring the Antibacterial Potential of Green-Synthesized MgO and ZnO Nanoparticles from Two Plant Root Extracts.

The green approach-based nanoparticle synthesis is considered a more cost-effective and ecologically responsible method of producing nanoparticles than other standard techniques. A major accomplishment in resolving these issues is the use of nanoparticles for environmental pollution remediation. This article describes a simple method for producing MgO and ZnO nanoparticles (NPs) using aqueous extracts of Zingiber officinale and Glycyrrhiza roots as the stabilizing and reducing agents, respectively. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersed X-ray (EDX) spectroscopy methods were used to characterize the biologically synthesized metal oxide nanoparticles (MO NPs). The XRD results showed that the mean crystallite sizes of synthesized ZnO and MgO NPs, which have excellent purity, are 12.35 nm and 4.83 nm, respectively. The spherical or elliptical shape of the synthesized NPs was confirmed by the SEM analysis. The antibacterial activity of the synthesized NPs against both Gram-negative and Gram-positive bacteria was thoroughly investigated. With a medium zone of inhibition of 7 to 10 mm, the as-synthesized MgO NPs and ZnO NPs demonstrated moderate antibacterial activity towards various bacterial strains.

Use of Insect-Derived Chitosan for the Removal of Methylene Blue Dye from Wastewater: Process Optimization Using a Central Composite Design.

Insects are a readily available source of chitosan due to their high reproductive rates, ease of breeding, and resistance to changes in their ecosystem. This study aimed to extract chitosan from several widespread insects: Blaps lethifera (CS-BL), Pimelia fernandezlopezi (CS-PF), and Musca domestica (CS-MD). The study was also extended to using the obtained chitosans in removing methylene blue dye (MB) from wastewater. The source of the chitosan, the initial concentration of MB dye, and the reaction time were chosen as the working parameters. The experiments were designed using a central composite design (CCD) based on the dye removal efficiency as the response variable. The experimental work and statistical calculation of the CCD showed that the dye removal efficiency ranged from 35.9% to 88.7% for CS-BL, from 18.8% to 47.1% for CS-PF, and from 10.3% to 29.0% for CS-MD at an initial MB concentration of 12.79 mg/L. The highest methylene blue dye removal efficiency was 88.7% for CS-BL at a reaction time of 120 min. This indicates that the extraction of chitosan from insects (Blaps lethifera) and its application in dye removal is a promising, environmentally friendly, economical, biodegradable, and cost-effective process. Furthermore, the CCD is a statistical experimental design technique that can be used to optimize process variables for removing other organic pollutants using chitosan.

Biochemical Profile and In Vitro Therapeutic Properties of Two Euhalophytes, Halocnemum strobilaceum Pall. and Suaeda fruticosa (L.) Forske., Grown in the Sabkha Ecosystem in the Algerian Sahara.

This study reports the biochemical profile and in vitro biological activities of the aerial part of two shrubs: Halocnemum strobilaceum and Suaeda fruticosa, a halophytes species native to saline habitats. The biomass was evaluated by determining its physiological properties and approximate composition. Hydro-methanolic extracts from Halocnemum strobilaceum and Suaeda fruticosa have been investigated for the inhibition of bacterial growth, the protection of proteins (albumin) from denaturation, and cytotoxicity to hepatocellular carcinomas (Huh-7 and HepG2). Their antioxidant activity was evaluated by five tests, including one that examined their ability to inhibit hydrogen peroxide (H2O2)-induced hemolysis. The profile of their phenolic compounds was also determined. These two euhalophytes had a high moisture content, high levels of photosynthetic pigments, elevated levels of ash and protein, low oxidative damage indices, MDA (Malondialdehyde) and proline, and low lipids levels. Their content was also characterized by a moderate acidity with good electrical conductivity. They contained abundant levels of phytochemicals and varied phenolic contents. Reverse phase high performance liquid chromatography (RP-HPLC) analysis revealed the presence of caffeic acid, p-coumaric acid, rutin, and quercetin in both plant extracts. On the pharmaceutical level, the two euhalophytes had anti-inflammatory, antibacterial, antioxidant, and cytotoxic properties, and therefore it was recommended to isolate and identify biologically active compounds from these plants and evaluate them in vivo.

Desert Endemic Plants in Algeria: A Review on Traditional Uses, Phytochemistry, Polyphenolic Compounds and Pharmacological Activities.

Due to their robust antioxidant capabilities, potential health benefits, wide variety of biological activities, and strong antioxidant qualities, phenolic compounds are substances that have drawn considerable attention in recent years. The main goal of the review is to draw attention to saharian Algerian medicinal plants and the determination of their bioactivity (antioxidant, anti-cancer, and anti-inflammatory importance), and to present their chemical composition as well as in vivo and in vitro studies, clinical studies, and other studies confirming their real impact on human health. Research results have revealed a rich variety of medicinal plants used to treat various disease states in this region. Based on in vivo and in vitro studies, biological activity, and clinical studies, a list of 34 species of desert plants, belonging to 20 botanical families, useful both in preventive actions and in the treatment of neoplastic diseases has been established, and polyphenolic compounds have been identified as key to the health potential of endemic diseases and desert plants. It has been shown that people who follow a diet rich in polyphenols are less prone to the risk of many cancers and chronic diseases, such as obesity and diabetes. In view of the increasing antioxidant potential of these plant species, as well as the increasing trade in herbal products from the Sahara region, phytosanitary and pharmaceutical regulations must change in this respect and should be in line with Trade Related Aspects of Intellectual Property Rights (TRIPS), and the sustainable use and development of plant products must be addressed at the same time.

Current Application of Chemometrics Analysis in Authentication of Natural Products: A Review.

BACKGROUND: The efficiency of herbal medicinal products depends on the quantity of active ingredients in them, which can vary considerably in different contents. Hence, the quality control of herbal medicines is a critical concern. OBJECTIVE: This paper aims to provide a succinct review of recent chemometrics applications in solving the uncertainty of the authentication of herbal medicines over the last two decades. METHODS: Studies involving chemometrics applications in conjunction with various analytical methods have been categorized according to the type of research used in the quality evaluation of different samples, including chromatographic (HPLC, GC-MS) and spectroscopic analysis (UVVis, FTIR, NMR, and MS). RESULTS: This review consists of over 90 studies illustrating the relevance of chemometrics methods in the discrimination based on the key bioactive components and phytochemical diversity of several herbs from closely related species. In addition to the prediction of the active components, the distinction between varieties and hybrids was accomplished through quantitative analysis techniques. CONCLUSION: Methods of chemometrics have provided an important and potent tool for the quality control and authentication of various herbs.

ATR-FTIR Spectroscopy, HPLC Chromatography, and Multivariate Analysis for Controlling Bee Pollen Quality in Some Algerian Regions.

Bee pollen collected by honeybees (Apis mellifera) is one of the bee products, and it is as valuable as honey, propolis, royal jelly, or beebread. Its quality varies according to its geographic location or plant sources. This study aimed to apply rapid, simple, and accurate analytical methods such as attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and high-performance liquid chromatography (HPLC) along with chemometrics analysis to construct a model aimed at discriminating between different pollen samples. In total, 33 samples were collected and analyzed using principal component analysis (PCA), hierarchical clustering analysis (HCA), and partial least squares regression (PLS) to assess the differences and similarities between them. The PCA score plot based on both HPLC and ATR-FTIR revealed the same discriminatory pattern, and the samples were divided into four major classes depending on their total content of polyphenols. The results revealed that spectral data obtained from ATR-FTIR acquired in the region (4000-500 cm-1) were further subjected to a standard normal variable (SNV) method that removes scattering effects from spectra. However, PCA, HCA, and PLS showed that the best PLS model was obtained with a regression coefficient (R 2) of 0.9001, root-mean-square estimation error (RMSEE) of 0.0304, and root-mean-squared error cross-validation (RMSEcv) of 0.036. Discrimination between the three species has also been possible by combining the pre-processed ATR-FTIR spectra with PCA and PLS. Additionally, the HPLC chromatograms after pre-treatment (SNV) were subjected to unsupervised analysis (PCA-HCA) and supervised analysis (PLS). The PLS model confers good results by factors (R 2 = 0.98, RMSEE = 8.22, and RMSEcv = 27.86). Prospects for devising bee pollen quality assessment methods include utilizing ATR-FTIR and HPLC in combination with multivariate methods for rapid authentication of the geographic location or plant sources of bee pollen.